Double Glazed Window Repair
The majority of double-glazed windows come with a warranty, so it's worth examining what it covers. Generally, it includes any problems with the window hardware such as hinges and locking mechanisms - within the first 10 years.
A leak in the seal can be the reason for mist to form between your glass windows. This issue must be addressed immediately to prevent mold or damp growing in your home.
Condensation Between the Windows
If condensation forms between windows in your home, it is an indication that the seal holding the insulating gas between the panes has failed. This is a serious problem that should be addressed immediately, particularly in winter when the humidity levels are at their highest. This could also cause damage to the sills or sealants and also cause mould.
Double-glazed windows should not have condensation between the panes. However, it is not common to have extreme humidity or a cold snap to cause this problem. The issue can usually be resolved without having to replace the entire window. A professional can make tiny holes in the window and then spray a special cleaning solution inside. The moisture is then sucked out of the window, and an anti-fogger device can be fitted to prevent any further buildup of moisture in the future.
Condensation between windows can be due to air leakage or other factors outside of the window. If this is the situation, it is likely to take longer for moisture to gather inside the window, since the air must be warm enough for the water molecules to evaporate. In these cases it is more beneficial to replace double-glazed windows instead of attempt to repair the sealed units.
Double-glazed glass windows are composed of two or more pieces of insulated tempered glass, which are joined by a metal frame. The gap between the two of the windows is filled with a non-toxic insulating gas such as argon or krypton and then sealed. The seal is responsible for stopping the gas used to insulate from escaping, and it also stops air and moisture from entering through the gap.
As windows age, seals get damaged and allow moisture to escape between the glass panes. RepairMyWindowsAndDoors is crucial to recognize when seals are beginning to leak, as it means that the double glazing isn't functioning as efficiently as it used to. This can result in poor energy efficiency, higher heating bills, damage to the properties and the risk of condensation between the windows.
Mist
If you notice condensation on the outside of your windows, it is perfectly normal and means that your double glazing is in good working order and retaining the heat inside your home. The condensation is caused by the outside air is hotter than the glass, and then reaches the dew point of the window before the air inside. This is among the many advantages of having high-quality double glazing.
If the condensation is on the inside of your window, it could be a sign of a ventilation issue in your home. This is because the excess moisture has no place to go and ends up on your windows or in carpets, furniture and in other places in your home. Getting this checked out by an expert and making sure that there plenty of fresh air flowing through your home will help prevent it from happening again.
Another reason for mist to appear on double-glazed windows is because the seal between two glass panes is broken. This could be due to wear and tear or by using chemical cleaning solutions. If this happens it is best to have the windows repaired as soon as you can.
Repairing your windows professionally will ensure that they remain clear of fog, free of condensation and free of misting. It is also a lot less expensive than replacing them completely and will also reduce your energy costs.
A FENSA-registered window installer can give you a quote to repair or replace your double glazed Windows. If your windows are quite old and have been in use for a while you might want to consider upgrading them to A-rated energy efficient windows.
It is best to keep copies of any warranties and agreements with the window installers. This will be very useful in the event that any issues with your windows occur in the future, and you then contact your installers to resolve these issues. This is a much better option than simply ignoring the problems, which will only get worse and could cause other issues within the home.
Close or open with difficulty
It's not only annoying when double-glazed windows can be difficult to open or close. They can cause higher energy bills because of the loss of heat and draughts. It can also pose security risk, particularly if the locks don't work correctly. It is essential to fix any issues with double-glazed doors and windows as soon as you discover them.
If you have tried opening your window using the most basic methods, such as using a screwdriver or tapping on the frame using a solid object, the issue may be more serious. It could be that the window has shifted within its frame and requires to be reset or it could be that there is gaps between the glass panes and frames. In either case you should consult a double-glazing repair expert to ensure that the repairs are done properly and to avoid any further issues.
It isn't uncommon for UPVC window handles and lock mechanisms to become stuck or unusable, especially when they are worn out and worn. This is caused by the accumulation of dirt or grease inside the handle. This can be solved by cleaning it using a uPVC cleaner. If this doesn't work then you can try tapping the uPVC frame with a hard object such as a screwdriver, being careful not to harm the handle or the window handle mechanism.
If this does not resolve the issue, then the window may have to be replaced as it is likely that the hinges aren't properly aligned, or the locking mechanisms are damaged. In this instance, you must contact a specialist UPVC window repair expert.
David The Window Wizard specialises in all technical aspects of double glazed window and door repair including fixing a jammed or locked shut double glass window. He has vast experience changing old window mechanisms to modern ones and can often save you the cost of replacing the entire window. For more information or to book an appointment for a free quote, contact us by phone or email today.
Warping
Double-glazed windows can be an excellent way to save energy in your home. They are made up of two distinct panes, with a spacer air or a dense gas between the panes. This creates an airtight seal that keeps cold air out and warm air in. However with time, the windows may become damaged or broken and require repair. Fortunately, the majority of these repairs are easy and can be accomplished without the expense of replacing the entire window.
Warping is a common problem when double-glazed windows are installed. The windows start to bow, bend, or twist, which could alter the structural integrity of the window and its insulation capabilities. Double glazed windows should be installed correctly and maintained regularly to avoid this problem.
If your double glazed windows are starting to warp, it is important to contact a specialist immediately to prevent the issue from becoming worse. They will be able inspect your windows to identify the root cause. They will employ special tools to fix your issue and ensure that your windows are completely sealed.
Water vapour can trigger this issue because it may build up between windows over time. This can be caused by a variety of factors, including the weather as well as humidity levels and temperature fluctuations. To address this issue the expert will drill out a small hole to let out moisture. The specialist will use a cleaning agent on the glass to clean it, then apply an adhesive.
In the alternative, if your windows aren't able shut or opened, it may be a sign of a break in the mechanism or hinges. It is advisable to lubricate these areas of the window prior to calling in a professional, as this may resolve the issue and lessen the need for replacements. However, if your windows are old or are not providing the insulation you would like to see It is generally better to replace them.